Patch cable, Internet cable and Patch your phone the Wi-Fi patch can be a little tricky.
Here are some steps to get started: 1.
Plug the cable into your phone.2.
Plug your cable into the cable outlet.3.
Turn off your phone and power off the outlet.4.
Wait a few minutes for the power to drain off.5.
Remove the cable from your phone, disconnect the cable, and reconnect it.6.
Plug in the cable again.7.
Wait several minutes for power to come back on.8.
Wait until you hear the phone ring and then plug in the phone.
If you’re using an iPhone 6s Plus, you’ll hear a click, then the phone buzz.9.
Once you hear a ring, plug in your phone again.10.
Wait some more, and the phone will ring again.11.
Plug it in.12.
Plug out the phone, wait a few more minutes, and then disconnect the phone from the cable.13.
Plug into your router, power it on, and connect to your router’s internet.14.
Plug all of your other devices into the internet.15.
Wait for your internet to be up and running.16.
Plug everything back in to your phone to see if everything is working properly.17.
Once everything’s working properly, connect your phone back into the router and check your internet connection.